NVIDIA's 580 series is the last to support Maxwell/Pascal/Volta, and
Blackwell requires the open kernel modules. The policy previously masked
>=595, which permits branches that already dropped those architectures,
and assumed the oldest card's branch could serve every newer card.
- Mask >=x11-drivers/nvidia-drivers-581 for the proprietary branch (the
first series after the last supporting one).
- Compute compatibility across the whole device set: Blackwell plus a
proprietary-only GPU has no single branch and is reported as an
explicit incompatibility (nouveau) instead of installing a driver that
cannot accelerate one card.
- Pascal + Ampere remains proprietary and supported (Ampere accepts
either flavor).
The live load script previously modprobed the NVIDIA stack for any PCI
vendor 0x10de and the build required etc/modprobe.d/phoebus-nvidia.conf
that nothing created. Replace the vendor-name check with a deterministic
decision computed from the actual display controllers and the bundled
branch's capabilities:
- phoebus-core gains live_nvidia_plan(): supported GPU -> load the
bundled accelerated stack; unsupported GPU -> explicit nouveau
fallback; no GPU -> leave auto-detection; fail-safe -> load nothing.
- phoebus-installer --live-gpu-plan scans sysfs (overridable for tests)
and prints stable key=value lines; probe_nvidia_display_devices() only
considers display-class NVIDIA functions.
- phoebus-nvidia-load consults it, falls back to nouveau on an
unsupported GPU or a failed accelerated load, and never fails the
unit; the service honours phoebus.nvidia=off.
- build.sh now creates the live modprobe policy, replaces Debian's
unconditional nouveau blacklist, and marks the fail-safe entry.
- resolve the NVIDIA branch and kernel-module flavor from PCI device IDs
(Turing+ open modules; Maxwell/Pascal/Volta proprietary, masked below 595;
Fermi/Kepler fall back to nouveau, reported; unknown IDs reported)
- capture pci_id/pci_address in the probe; drive VIDEO_CARDS, package.use,
package.accept_keywords, package.mask, modprobe.d and dracut from the plan,
preserving hybrid Intel/AMD
- add the nvidia_drivers install stage (after the kernel, before boot) that
emerges the driver, regenerates the initramfs, records /etc/phoebus/nvidia and
fails the install on failure; sys update rebuilds modules and the initramfs
- refuse AI changes to x11-drivers/nvidia-drivers
- live ISO: signed non-free components, stable-kernel pin (testing 7.2 breaks
the 550 driver), DKMS build for the exact kernel, gated pre-greetd load,
fail-safe entry, gpu-report, and a --verify-live-nvidia build gate that runs
on cached rootfs builds and fails on any missing component
- docs: ADR 0012, STATUS/CHANGELOG/HANDOFF, live README
- also carries the pending OpenCode model-variant/streaming changes and fixes
the GUI bridge install thread join that could hang
Add ai.backend (direct|opencode) plus opencode_server/provider/model
fields, distinct from the direct provider. Require the change-object
shape (action+value) in the proposal prompt: the shipped models keyed
changes by the action name otherwise.
Reject a symlinked path component while writing beneath TargetRoot
instead of following it, so a planted symlink cannot redirect an
installer write to the host. Cover escaping directories and leaves.
Add a branded live welcome window and a Quickshell/QML installer frontend
over a narrow, fail-closed JSON bridge (phoebus-installer --gui-bridge)
that reuses the same InstallConfig, plan, validation, authorization and
staged executor as the TUI/CLI. Add the Phoebus brand system (emblem,
wordmark, wallpaper, tokens), suppress DMS first-run dialogs on the live
medium, identify the live medium as protected, make the installer
shortcut live-only, and fix the installed boot default so systemd-boot
never selects the recovery entry.
Verified in a disposable graphical VM (welcome/installer journey,
duplicate prevention, keyboard navigation, blocked AI prerequisite) plus
a real non-interactive install and detached boot (INSTALL-RC=0,
NO_SECRET_LEAK, systemd running, 0 failed units, LUKS2, Btrfs, network).
- desktop.profile defaults to mango with Flatpak on; explicit none/minimal/dwl/
full still win. The plan shows the selected session.
- Installed login uses greetd + tuigreet (authentication required, Mango default,
dwl selectable); live autologin is a separate live-only configuration.
- installer/live/build.sh builds a rootless Debian testing rootfs with Mango
(pinned source build), DankMaterialShell (pinned SHA-256 release), Quickshell,
scenefx, Qt Wayland and greetd, then splices it into the base Debian-Live boot
equipment. Live autologin, an Install Phoebus launcher and a serial/VT
recovery console are included and the build fails clearly if a desktop
component is missing. Verified in a graphical seat-providing VM (Mango + DMS +
Quickshell; DMS panel captured).
- Shared desktop assets emitted by phoebus-installer --emit-asset, a graphical
VM driver (live-driver.py), and regression tests for defaults/overrides,
login, live/installed separation and the live ISO guards.
- Docs updated: ADR 0005/0009, STATUS, HANDOFF, CHANGELOG, ROADMAP, DEVELOPMENT
and VM-BOOT-VERIFICATION.
- Write guru.conf with auto-sync = no so the first emerge --sync (before
dev-vcs/git exists) only syncs the main tree; GURU is synced explicitly.
- In the Mango session, check dms.service is active after starting
mango-session.target and fall back to a direct 'dms run' if not.
- Mango + DankMaterialShell desktop option (desktop.profile = "mango") through
the GURU overlay with scoped ~amd64 keywords, a sealed session entry point and
a dwl fallback session (ADR 0009).
- Coherent rollback/recovery: coordinated @ + @var snapshots, fstab and BLS
root-subvolume rewriting, matching-kernel selection, snapshot recovery entry,
retention/space gates and sys undo (ADR 0007).
- Installed assistant (sys ask) with an OS-level systemd sandbox boundary and
fail-closed typed plans; resolved package effects bound to approval.
- Nix build isolation enforced (sandbox, no fallback) plus lifecycle/cleanup.
- Desktop helpers (menu/lock/idle), transaction log, release gates with atomic
publish and signing helpers, and a Debian-Live appliance VM harness.
Nix is on by default (NIX_ENABLED=no opts out); a desktop VM verified
nix-daemon active and 'nix shell nixpkgs#hello' -> Hello, world!. Create
/nix/var/nix/daemon-socket (the unit's ConditionPathIsReadWrite) and the
.wants links. finalize now runs sync before unmounting so the session script
and exported log are durable across a forced poweroff.
A binary ebuild is impossible (the upstream installer has no DESTDIR and runs
nix-store --load-db against the real root), so bootstrap the pinned,
SHA-256-verified official release with discrete commands in the target chroot
(no curl|sh, no sh -c): store copy, DB load, nixbld users, profile wiring and
nix-daemon units. Gated behind packages.nix (default off) until VM-verified.
Installing Phoebus now requires a connected model: the install gate refuses
with no provider unless the explicit break-glass --no-ai (alias --legacy, or
PHOEBUS_NO_AI=1) is used. Add a 'local' provider kind (Ollama/llama.cpp/
LM Studio) with an optional API key and --ai-endpoint override, so a user can
run a model they downloaded; no model is shipped. Desktop installs now include
xdg-desktop-portal + gtk/wlr backends for Flatpak and Wayland apps.
sys install <name>, sys remove <name> and sys search <query> are
deterministic and model-free: Portage resolves a bare name or a full atom.
Adds the remove_package and search_packages typed actions (remove is High risk
and gets the protective snapshot; search is read-only). This is the
old-fashioned fallback so the system stays fully administrable with no LLM.
Drop the unused installkernel uki flag (BLS uses uki_generator=none), remove
the empty wireplumber line and the duplicate pipewire entry, and add scoped
package.use plus explicit build jobs to the typed config. The binhost URI is
now derived from the selected profile when unset. No change weakens signature
verification or enables ~amd64.
The session script started waybar/mako/swaybg before dwl created the
Wayland socket and never started the polkit agent. It now starts dwl first,
waits for wayland-0, establishes a session bus and runtime dir, starts the
polkit authentication agent, and kills helpers when the compositor exits.
High-risk sys actions now create their protective snapshot inside
actions::execute and abort if the .snapshots subvolume exists but the snapshot
fails, instead of warning and mutating anyway. Corrupt snapshot history is
surfaced as an error rather than being silently treated as empty.
Initial public import of the proven Bash installer (installer/) and the production Rust workspace (installer-rs/). The reference ISO, build output and local agent transcripts are gitignored.
Verified: installer/tests/run_tests.sh and cargo test --workspace both pass.